JOINT STATEMENT BETWEEN ROYAL MAIL AND CWU ON
INCREASING THE STANDARD VOLUME OF TRAYED MAIL
DESPATCHED ON YORK CONTAINERS
Introduction
Following a large scale sampling operation and industrial study at 11 Mail Centres to prove the average weight of trayed mail for each traffic stream and product and following detailed discussions between Royal Mail and the National CWU regarding all aspects of safety it is intended to increase the standard volume of trays despatched on York containers.
Background
Currently the majority of Letter and Large Letter mail is received, transferred between work areas and despatched in trays in Yorks. The Safe System of Work for a York container volume and fill states that ‘No container to be filled above the top of the container and must be loaded within the weight limit’.
It was identified that the current method of operation for the number of full trays carried in York Containers varied from 20 or less up to 28. The object of the review was to establish via an industrial study and practicable application a generic standard for the number of trays that can be safely accommodated in a York taking into account the safe working weight of 250 kgs per container.
This adopted fill, whilst most certainly meeting the fill and volume criteria, does however under utilise our asset and increases our required capital expenditure, as well as creating additional Yorks to be needlessly transported through our network. Additionally by under filling the York containers time is wasted within Mail Centres and Delivery Offices needlessly moving equipment from one point to another.
Operational Change
The new standards to adopted by all Mail Centres will be:
28 trays for all York’s despatched at Outward from Mail Centres, Transported and
Processed within the Logistics network and received at Inward by Mail Centres
and
24 trays for all York’s despatched at Inward by Mail Centres and by Mails Processing
Units for distribution to Delivery Offices.
The sampling exercise has shown that for the vast majority of Yorks despatched the gross weight for a York will not be exceeded. There will, as always be times and mail types, that will force the gross weight to be exceeded if the standard fill is rigidly adhered to. The maximum weight of a York container MUST NEVER be exceeded in any circumstances.
If a York is believed to be overweight it should be weighed using scales available in each mail centre (regardless of how far these are away from the despatch point) and where necessary have its contents broken down into another York until the weight is within the maximum allowable level THERE ARE NO EXCEPTIONS PERMISSABLE TO THIS WEIGHT STANDARD AND OFFICES FAILING TO COMPLY WILL BE PUTTING ALL STAFF AT RISK FROM OVERWEIGHT CONTAINERS.
Safe Systems of Work (SSOW)
As part of the in depth safety review around increasing the trayed volumes on Yorks a review of the Safe System of Work (SSOW) has been undertaken jointly between Royal Mail and CWU Health and Safety experts. A copy of this updated SSOW document is attached. This should be shared with all staff and a record of them having received and understood its contents should be kept on file for audit purposes.
This updated Safe System of Work also includes the movement of a York container by individuals who cannot see over the top of the equipment due to the increase in trayed mail. This way of moving the York has been evaluated and agreed as safe by Royal Mails Ergonomists, Safety Experts and the National CWU Health and Safety Representatives.
Traffic Recording (MIST)
Detailed instructions regarding the recording of traffic based on these revised York fills are attached. All offices will introduce the new traffic recording instructions at the same time regardless of where they sit in the deployment programme.
Timescales
The new standard will be able to be deployed from the 30th August 2011.
Local discussions will take place in line with the IR Framework to introduce any adjustments that may/will be required including, where necessary, any supplementary operational/safety training.
It is acknowledged that all locations should aspire to introduce the new standard with in a reasonable timeframe however where specific local issues may delay/defer the introduction of the new standard this these should be flagged up to the respective Departments at Royal Mail and CWU Headquarters.
In addition to the above, the deployment of the new standard will be monitored locally and reviews involving all relevant local partiers should be time scaled to support the deployment activity. The output from these Local Reviews will be fed into a Formal Review that will be scheduled no later than four weeks after the 30th August 2011.
Vehicle Loads
Analysis has shown that the increased York fills reduces the number of Yorks that can be loaded on to a 7.5t vehicle by on average one York i.e. if you currently load 13 Yorks then after the increase this will reduce to 12. The Driver is at all times responsible for ensuring the maximum load weight of their vehicle is not exceeded. Vehicles should, where possible, always be loaded as full as possible PROVIDING THE MAXIMUM GROSS WEIGHT ALLOWABLE FOR THE VEHICLE IS NOT EXCEEDED
Base data Annual Review
The data used to increase the York fills will be subject to validation on an annual basis. Annual sampling exercises will be undertaken to ensure operation and safety criteria are not compromised.
…………………………… ……………………………
Francis Williams Phil Browne
Royal Mail CWU
Date……………………… Date..24th August 2011……
……………………………
Terry Pullinger
CWU
Date..24th August 2011……